21.59
Unknown
DEFAULT
STATIC ROUTING ON CISCO
Table Addressing
SETTING
STATIC ROUTING
Perintahnya
:
|
Router(config)#ip route 0.0.0.0 0.0.0.0 (Ip Address or
exit-intFA)
Static
Default Route
- Default route dapat digunakan
ketika network destination tidak diketahui (Internet)
- Default route dapat digunakan
ketika hanya ada satu jalur keluar untuk semua network
- Dapat Mengurangi ukuran routing
table
- Jika router tidak menemukan
entry network destination di routing table, maka router akan memforward
paket ke default route
- Menjadi route terakhir di routing table
KONFIGURASI
Router 2
Router>
Router>en
Router#conf
t
Enter
configuration commands, one per line. End with CNTL/Z.
Router(config)#interface
FastEthernet0/0
Router(config-if)#no
shutdown
Router(config-if)#
%LINK-5-CHANGED:
Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN:
Line protocol on Interface FastEthernet0/0, changed state to up
Router(config-if)#
ip address 192.168.1.254 255.255.255.0
Router(config-if)#exit
Router(config)#interface
FastEthernet0/1
Router(config-if)#no
shutdown
Router(config-if)#
%LINK-5-CHANGED:
Interface FastEthernet0/1, changed state to up
%LINEPROTO-5-UPDOWN:
Line protocol on Interface FastEthernet0/1, changed state to up
Router(config-if)#ip
address 12.12.12.2 255.255.255.0
Router(config)#int
Lo1
Router(config-if)#
%LINK-5-CHANGED:
Interface Loopback1, changed state to up
%LINEPROTO-5-UPDOWN:
Line protocol on Interface Loopback1, changed state to up
Router(config-if)#ip
address 172.16.1.1 255.255.255.0
Router(config-if)#int
Lo2
Router(config-if)#
%LINK-5-CHANGED:
Interface Loopback2, changed state to up
%LINEPROTO-5-UPDOWN:
Line protocol on Interface Loopback2, changed state to up
Router(config-if)#ip
address 172.16.2.2 255.255.255.0
Router 3
Router>enable
Router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#interface FastEthernet0/0
Router(config-if)#no shutdown
Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
ip address 192.168.2.254 255.255.255.0
Router(config-if)#
Router(config-if)#exit
Router(config)#interface FastEthernet0/1
Router(config-if)#
Router(config-if)#exit
Router(config)#interface FastEthernet0/1
Router(config-if)#no shutdown
Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up
ip address 12.12.12.2 255.0.0.0
Router(config-if)#ip address 12.12.12.2 255.255.255.0
Router(config-if)#int Lo3
Router(config-if)#
%LINK-5-CHANGED: Interface Loopback3, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback3, changed state to up
Router(config-if)#ip address 172.16.3.3 255.255.255.0
Router(config-if)#int Lo4
Router(config-if)#
%LINK-5-CHANGED: Interface Loopback4, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback4, changed state to up
Router(config-if)#ip address 172.16.4.4 255.255.255.0
ROUTE IP Default
Perintahnya :
Router(config)#ip route 0.0.0.0 0.0.0.0 12.12.12.2
Router(config)#ip router 0.0.0.0 0.0.0.0 fa0/0
Lalu ketik perintah ini :
Router#show ip route
Setelah itu PING dari laptop satu ke laptop lainnya !
0 komentar:
Posting Komentar